Main Menu

future 9162

Started by Badhorse79, February 03, 2014, 11:09:11 PM

Previous topic - Next topic

Badhorse79Topic starter

Got this ol gal on ebay for $56 !! Its also my first Kato model .  I plan on decking it out as 9162 all because it has a Black PTC platform not gray lol
I will most likely start this after my slug is done !!! So it may be a double dip situation 

thpbears

Looking nice. That's a pretty good price.

Badhorse79Topic starter

Yes it is a great deal ,  with 13 minutes to go it was @ 45 I put 60 and I for sure thought I'd get out bid !!! Not the case lol ! But it needs a lot of work to make it a true D9-40CW !!! Im gonna try (try) to make it as close as possible ?

NSTopHat

Looks to be an interesting project as the prototype has gone through several detail changes during its lifecycle. Plow is off of an ex-CR (Atlas) D8-40CW for starters. Not sure I have seen the correct number board font from anyone at this point.

Keep us posted.

Regards,
Russ

NSTopHat

Badhorse

Do you have a top 3/4 image you can post or a link of same image location? I am curious to see if the painted the whole PTC platform or just the faces that can be seen from the ground. The reason I ask is that the platforms have anti-skid locations painted into the surface from the factory.

Regards,
Russ

Badhorse79Topic starter

http://www.rrpicturearchives.net/showPicture.aspx?id=3703073


Looks to be all painted bears thanks for asking this as I wasnt to sure myself lol


NSTopHat

Quote from: Badhorse79 on February 06, 2014, 02:28:27 PM
http://www.rrpicturearchives.net/showPicture.aspx?id=3703073


Looks to be all painted bears thanks for asking this as I wasnt to sure myself lol



Badhorse

I wouldn't go by that image as 8156 was painted by GE and the 9162 was repainted by NS. The PTC unit was grey when it was installed. I can see the paint shops masking the top surface and painting the side faces black. They do some goofy things in Altoona....

Regards,
Russ

Badhorse79Topic starter

Im sorry Top hat I mistakenly thought bears asked that question  :-\

Im just gonna paint it black lol but your correct who knows what they do to these things

NSMoWandS

#8
I found these two pics. 1st one shows an all grey PTC. It is old paint job. Also had black numberboards with white numbers. The 2nd pic is of 9162 in HH paint. If you look closely... the sinclair ant are black... so, I would place a bet that the whole thing is black now. DE Dan

http://www.rrpicturearchives.net/showPicture.aspx?id=3712056

http://www.rrpicturearchives.net/showPicture.aspx?id=3703273

Badhorse79Topic starter

Thanks Dan appreciate the Help  8)

NSMoWandS

The ants are black right? Or do I need to go to the eye doctor? LOL! DE Dan

Badhorse79Topic starter